Online PC Support

OPS Technical Solutions : +1(833)-522-1003


How to start the computer in its safe mode

A troubleshooting option available in a Windows system, the start mode helps you start your computer but in a very restricted state. It allows you to start your computer with only a few basic files and also drivers which are needed for the Windows to run successfully. Your usage gets restricted once you start your computer in the safe mode. The startup programs in the most common situations don’t run successfully in the safe mode. Generally, the safe mode proves to be a very useful system for all types of troubleshooting issues related to the drivers and programs which cause the Windows to not start correctly. Also, if the problem fails to appear on the screen as you turn on the safe mode, you have the chance to eliminate the scheduled default settings along with the other basic device drivers which probably may be the cause for the starting issue. There are also chances that a newly installed program in your computer prevents the Windows from starting normally. In such situations, you can easily start the computer in its safe mode and later delete the particular program. Well, in case if you are not aware of how to start your computer in its safe mode then simply follow procedure mentioned below.

  1. If you have any CD, floppy disk, DVD, etc. inserted into your computer, simply remove it from your computer. Now try to restart your computer again.

Click on to the Start button in your computer and then click on the arrow located right next to the Shut Down button. Here click on Restart.

2. Select one of the given options:

    • In case your computer has just one single OS installed in it, then press F8 and hold it for sometime while your computer restarts. The F8 key should be pressed before the Windows logo appears onto your computer screen. However, if the windows logo appears before you press F8, then you will have to try it all over again until you are finally prompted by Windows logon message. Now shut down and then again restart the computer.
    • In case your computer is installed with more than one OS, then make use of the arrow keys to simply highlight the particular operating system which needs to be started in the safe mode. Now press the F8 keys.

    3.  As the Advanced Boot Options screen appears, highlight the safe mode using the arrow keys for the option you wish to select. Now press Enter.

    4. Finally, log onto your computer using the user account with the administrator rights.

    Just as your computer starts in the Safe Mode, you will notice these words, Safe Mode written in one of the corners of your computer monitor. Well, in order to simply exit this safe mode, you will have to restart your computer and then let it start normally.

    In this way, you can start your computer in the safe mode easily and then take up your backup or follow any process based on the requirements.

    How to Back up Any Hard Drive Using PC Inspector Clonemaxx

    In this article we will represent a methodology enables you to make an image copy of your actual HDD” Hard Disk Drive” to an extra HDD, it’s appropriate for absolutely any operating system on condition that the existing computer machine has at least  a 3.5 ” floppy disk. Simply the “Image” is an identical memory copy of your computer acts the same way you backup copy of your data. Your PC can function using this image of your HDD only if it’s the original one otherwise it fails to operate. It provides all in relation passwords, installations and all the application setting of everyday use. You may wonder, does it affect my HDD contents? The answer is absolutely not it’s totally independent of your HDD’s contents. The image functions through files stored on a floppy disc constructed by a “Clonemaxx” download. According to operating without approximately no processor involvement deserves to be mentioned DMA transfer” Direct memory access”, the cloning process is considerably fast.

    Steps to follow:

    • First you need to download the PC “Inspector Clonemaxx”, grab the spare HDD, and set it to act as Slave HDD during the copying process.
    • Check if your mother board reads both HDDs you connected to your machine; don’t run the Clonemaxx until they are already configured.
    • In this step you have to prepare your machine to be cloned by checking on the whole system if it holds the essential requirements you need when making the image to be extracted once demanded. Install all the software applications daily use, make sure that your computer is virus free and well defragged. Once this mission is complete, restart your machine and disconnect the power cord.
    • Now open the case of your computer to add the new drive. In case you own additional power and data cables, you can use them when attaching the new HDD to the Mother-Board; it’s easy as you can just imitate how the old HDD got connected. Incase you don’t have additional cables or there is no non-occupied connections on your Mother-Board for the new HDD, you can temporarily use the CD/DVD drive cables.
    • It’s ok not to nag yourself searching a place fits the new HDD, the HDD packing that came with for protection or insulation is so enough. If you are obligated to lay it into your PC just let a soft insulating material to pose beneath the HDD to avoid any harmful circuitry issued by the case, then close your PC case and reboot your machine.
    • This step will show you if you connected everything like it has to be or you really missed something, if you faced any error messages, you can just turn off your machine and re-connect or alter the cables.
    • Once your machine operates ordinarily, run the Clonemaxx.exe application. The application will ask for making an ‘exe’ file on a new boot floppy disk which in return will make all the data transfer processing
    • Reboot your machine with the previously made disk inside its driver, follow all required instructions presented by the Clonemaxx. A while after functioning, the application will declare that all files have been copied successfully.
    • Now its time to examine the newly installed drive, you can do this by removing all cables lying at the back of the primary drive, install the new drive instead and wire all cables back. Never forget that all the switching and taking off cables work is processed when it’s powered off.
    • Modify the” Cross Connects” to make the newly installed drive behave as” Master”.
    • Close the computer case, remove the floppy from its driver and reboot your machine. You will find that it operates using the new hard drive.

    Finally we would like to make you pay attention that SATA connector totally differs from IDE or PATA connector. Make sure to choose cables carefully while you are selecting the drive. Also be aware that the drive capacity is required to be at least the same as the old one in order not to face errors while cloning, and you find yourself forced to re-image it again.

    How to Restore an Image from a Flash Drive

    Flash drives are fast becoming excellent modes of short-term data storage options for people who work on more than one computer at a time. Sometimes it is very important to carry a particular file to office from your PC or share some important data with friends. It is not always possible to send emails with attachments or burn CDs at the drop of one’s hat. This is where the Universal Serial Bus system of storage comes into use. The USB system of storage is used in a flash drive which makes it a more portable version of a floppy disk. It is also capable of storing larger volumes of data than the floppy disk.

    However, a lot of people mistake the flash drive to be a permanent storage device. Using it over time can corrupt some or all of your files on it. Since it is being connected to more than one computer there are chances of picking up malware and virus infected filed which in turn can corrupt your PC as well.

    Formatting the flash drive is a great way to prevent system corruption. However, in doing so many people end up losing important data since they have not backed up the stored information before hitting the “format” option.

    Here is a step-by-step guide to recovering lost data from your USB drive:

    1. Find reliable file recovery software on the Internet that is compatible with your system and download and install it. Make sure that it is not poor quality software that may further corrupt your system.
    2. Attach your flash drive to your computer and run a device search after opening the recovery program. The program should pick up any USB device that is connected to your computer immediately.
    3. Use the “Complete file search” option on the right hand top side of your recovery program window to find any file that was lost or deleted from your flash drive.

    There are separate options for searching image, doc and multimedia files on the tool bar. You can run these searches individually if you are looking for specific files to recover from your flash drive.

    You may run a “Searching Active File Areas” on the default option in the menu of the recovery program. For specific searches you have to run the “Searching Archive file Areas” in the Advanced option available on the menu as well. Make sure you select the box which shows your flash drive for the software to run a search for recovering files on it.

    You can customize the settings of data recovery and storage on the recover program according to you needs. The software can read drives that were archived and searched on it previously if you set it accordingly.

    Make sure you select the files that have been recovered by the software and save them in the appropriate path on your computer. Don’t just leave it in the flash drive as there are chances of losing it again in future. Back up the files you use on your flash drive to be safe.

    How to Find a Bluetooth Network

    In today’s supersonic age, quick and effective communication is the key to success. Various options of sending streams of data are available to us, such as wireless technological devices like Bluetooth, Internet, USB, etc.

    Through a Bluetooth network one can transfer and receive data, but only in a limited range. This network cannot be used in isolation; it requires the presence of devices like cell phones or laptops to send and receive signals.

    Advantage of a Bluetooth network

    Transfer of data via Bluetooth network is one of the safest methods to exchange data. Other methods like USB, CDs, floppy disk etc. have the danger of being corrupted or/and carrying viruses.

    Ways of searching a Bluetooth network

    The facility of Bluetooth can only be enjoyed if your cell phone or laptop has a built-in mechanism to allow you to use it.

    Usage through cell phones

    Almost all cell phones come with a built-in Bluetooth facility. Through this network one can send any number of songs, pictures and other kinds of data. Steps for usage are:

    • The primary step is, to know whether your mobile phone is enabled to establish a Bluetooth connection with other devices. To find this, one has to go to either the “Settings” section or “Connectivity” section in the menu.
    • Once you find the “Bluetooth” option present in any of the sections, just switch on the Bluetooth network by clicking on the icon.
    • Once the network is activated, streams of all kinds of data can be transferred. Just select the data you wish to send and click on “Options”. Click on the send icon and you will be asked to choose “via MMS” or “via Bluetooth”. Once you choose the second option, the system will automatically search for other devices open to receive data.
    • All the devices present at that time will be flashed on your screen. You have to select the receiver and click on “Send”. At the click of “Send”, the data will be transferred to the recipient in a span of few seconds.
    • Once the data is sent, a confirmation appears on both; the sender’s and the recipient’s screen, assuring successful transfer.

    Usage through Laptops

    The primary step to activate Bluetooth network in laptops, is first to find out whether the laptop has a built-in Bluetooth facility. If is doesn’t, a USB Bluetooth adapter can be used to transfer data through this medium. For the users of USB, scanning the access areas is vital, in order to protect the laptop from virus attack.

    Bluetooth network can be easily activated on a network. This is done by clicking on the “Bluetooth” icon on the screen.Users of Bluetooth network through a laptop are susceptible to virus attacks. While your connection is “On” many other users can try to send you corrupted or infected files, which once opened can damage your system. To avoid such an occurrence one can should put a security password for transfer or receipt of any type of data. Once the Bluetooth network is activated, “scan for devices” should be enabled. This will flash all Bluetooth enabled devices in your range. You can select your recipient and the file to be sent.

    Different Bluetooth scanners follow different methods for connectivity. To know the detailed procedure your device requires you to follow, you should read the instructions manual or browse through the “help” option available.

    How to Solve a Computer Virus Problem

    A virus is a type of computer program which takes control of the system by infecting it. There are various kinds of viruses infecting computers such as malware, adware and spyware. These viruses are not able to reproduce. A virus can easily spread from one single computer to another. To spread, a virus does not require any special medium; it may occupy any file or folder. When one user sends it to another, over internet or any network, there is a possibility of it affecting the receiving system. In addition to this, if a removable medium such as USB drive, DVD, CD, floppy disk can also be used.

    After the computer gets infected by the virus, it is very difficult to manage the whole system and protect important files and folders in your computer. Basic computer knowledge is a must to avoid any such incidents, especially when you are working on the internet. If you know about firewall settings or install anti-virus software, you can be protected with a secure cover.

    Simple instructions to fix a Computer Virus

    If you are experiencing a virus affect in your computer, you can make use of the following ways to get rid of it:

    • First try to boot up the computer in safe mode. It is recommended that you perform all your revamp activities in safe mode, if you want to avoid any other damage to your system. Restart the computer. Press the key F8 a number of times until a black and white screen appears. Select the safe mode option and press enter on your keyboard.
    • After the computer is completely booted up, clean and optimize the browser. It is also recommended that you clean both the browsers if you are using Mozilla Firefox and Internet Explorer. To open your browser, go to Tools, and delete all download and browsing history, including active logs, cache and cookies.
    • You should close all open windows and find the “My computer” icon on the desktop. Use right click and select properties. Choose the System Restore tab. If you want to further spread the virus to other files, turn your system off because most of the viruses always occupy the system restore folder.
    • Close down all open windows and go to the “Start” menu and then go to Search or Run. Type winmsd and press enter. Now go to the software environment category and select “Startup Programs”. You are now ready to scan the list. Delete all unknown programs which you are not aware of.
    • There is another option on the internet. You can run the online anti-virus scan. You can find several sites providing free anti-virus scan such as and All the viruses found by them, will automatically be deleted or removed.

    If you want to stop the virus from getting multiplied, the above mentioned points may be used. The best way of preventing any virus attack is installing any licensed anti virus software program, which is reliable and advanced! It always monitors the files you are about to download and alerts you when there is any virus found on your system.

    Call Now: +1 833-522-1003
    Call Now: +1 833-522-1003
    Call Now: +1 833-522-1003