Online PC Support

OPS Technical Solutions : +1 315-226-4249


How to Format a Linux Hard Drive to XP

Linux and Windows XP run best on their own file systems. While the former runs better on hard drives formatted in the ext3 file system, Windows prefers the NTFS format.

Formatting a Linux Hard Drive to XP

It would require two methods; you can either follow the procedure involving the Windows XP installation CD, or the one that involves the Ubuntu installation CD.

Step 1: First of all, reboot the computer from the CD, and then wait while the installation program cycles through its start up sequence. At the first menu, press the Enter button, after which press the F8 key to accept the license agreement.

Step 2: If an existing copy of Windows has been detected by the program, press the ‘Esc’ button.

Step 3: Select a partition for deletion with the cursor; then press the ‘D’ key, followed by the ‘L’ key to delete it. The Linux partitions would be displayed by the program as ‘Unknown’. Keep repeating the step until all the unwanted portions have been deleted.

Step 4: Then place your cursor on the field marked as ‘Unpartitioned Space’, click on it and then press the Enter button in order to create a Windows XP partition.

Step 5: Select the option of NTFS formatting only in case Windows XP would use the partition. On the other hand, you can go for FAT32 formatting if both Linux and Windows would read from and write to the partition.

Step 6: Continue to install Windows; otherwise press the F3 key to quit the installation process.

Instructions using the Ubuntu installation CD

Step 1: To start with, boot the computer from the Ubuntu Linux CD, and then follow it up by launching the option of Ubuntu Live from the CD. It can be done by selecting the option ‘Try Ubuntu without any change to my computer’.

Step 2: Under the ‘System’ tab, look for the Partition Editor program, open it, and then open ‘Administration’ on the top deskbar.

Step 3: You now need to select the non Windows or Linux partition that you no longer wish to use, and then delete it. Repeat the same step for all other unnecessary partitions.

Step 4: To create a partition for Windows XP, click on ‘New’; and choose the NTFS format in case the partition would be used only by Windows. Go for the FAT32 format if Linux or Mac OS X would share the partition with Windows XP.

Step 5: To finalize your changes and to begin the reformatting process, click on ‘Apply’.

Step 6: The last step involves installing Windows XP on the FAT32 or NTFS partition created by you.

There are some additional tips to be followed while formatting a Linux Hard drive to XP. You should create separate partitions for each OS if you intend to install more than one operating system on the same drive. You should also back up all important data before formatting as it would delete the contents of your partition or hard drive.

How to Format a Microsoft Access Table Field

The Format property in Microsoft Access is used to customize the way text, date, time, numbers and other values are displayed.

Formatting the table field can be done in two ways.

  1. Can use the predefined formats available – There are different data types available and for each data type, different settings or different predefined format are used in Format property.
  2. Using the format symbols, one can create a custom format.

For whichever field, a format needs to be done, you can set a property in control’s property sheet. We can do this in two ways.

  1. Choose fields property section -> table design view.
  2. Choose field properties property sheet -> design view

Point to be noted : The format property only formats the data and it does not affect the data that is already stored.

Predefined formats

Following predefined formats are available for data types in Microsoft access .

  • Time/Date
  • Currency
  • Number
  • Memo and Text
  • Yes/No

These predefined and the display formats are region/country specific. This can be specified in Windows control panel by double clicking on the regional options.

Example :

If you select the country/region as United States, then the currency value of 534.25, then it appears as $534.25. Whereas, if you select, country/region as India, the same currency value appears as Rs.543.25

In visual basic, we write these predefined formats as,

Me!Date.Format = “Long Date”

Me!Time.Format = “Medium Time”

Me!Registered.Format = “Yes/No”

In table design view, if you set a format property for a field, Access uses the same format to display the data.

Custom formatting symbols

For any data type, the following symbols can be used in a custom format

  • If you choose the symbol as (space) then Access displays the spaces as literal characters
  • If you choose “abc”, then Access displays that is placed inside the quotation marks as literal characters.
  • If ‘!’ is chosen, then Access formats in left alignment instead of right alignment.
  • If ‘*’ is chosen, then Access fills the spaces with the next character.
  • If ‘\’ is chosen, then as a literal character, Access displays the next character
  • If ‘color’ is chosen, then the data will be displayed in the specified color.

Note : Custom formatting symbols for currency and number data types cannot be mixed with memo and text or Yes/No formatting symbols.


Forms!Employees!HireTime.Format = "DD/MM/YYYY"

The Precedence

For any particular data, if you have defined an input mask and the format property is also set, then the input mask is ignored and the format property takes the precedence. For an instance, if you create a Logn Id input mask in a table design view, and you had set the format property for that field, then the Login id input mask is ignored /omitted and the data is displayed as it is in the format property .

How To Format A Hard Drive On Windows Vista OS

Before you actually go for installing any operating system such as Windows Vista or any other, it would be a great idea to have a look around to search for all of the new drivers for the hardware which is a part of your system. There are many drivers that you would need such as the soundcard, graphics card, raid if you use it, and the motherboard drivers are considered to be the main ones which you might need.

Check for hardware in Control panel
There are certain steps which you need to follow when you want to format the hard drive. First of all have a look at the control panel of your system and see for the hardware devices which are currently installed on your system if you do not know this already. The tools such as Sisoft Sandra can also be downloaded that can give you all details about the analysis of your system for this purpose. Many of the drivers which you would need can be found on the web site of your motherboard. ATI and Nvidia are the main vendors of the graphics cards and one should be checking their web sites to know about the latest drivers for graphics. Also make sure that your system is ready for Windows Vista operating system. Before you actually go for formatting your hard drive you should first back up all of the important files and documents. This would save you from any sort of trouble because when you go for formatting your hard drive then all of the files as well as the settings would be erased. Mozilla tool can be used for saving the settings of the browser.

You can also have two hard drives in your system and keep one for the operating system and the one for saving your files and data. The future OS upgrades or re-installs would be easier with the help of this. If you do not have two hard drives then you can always make two partitions. One partition should be at least 50GB for Os and the other can be for the files and data. During the installation of Windows the partitions can be selected.

Windows Vista CD
The CD of Windows Vista is also very important and you should have it when you need to start the installation. Once you have all the necessary things such as back up disks, Windows CD, software and drivers etc then you should find that which OS is installed on your system. Windows Vista makes use of NTFS formatting process.

Change boot order
In order to start this process, put in the CD of Windows Vista and restart the computer. Change the boot sequence and make CD Rom drive the first boot device. Press F2 to enter the boot menu and then change the boot sequence from there.

After this save the BIOS and restart your computer again. You should also look for the option to boot from the CD drive. Usually by pressing the space bar you can start from the CD drive. After this the windows installation instructs for each step and you can easily proceed with the installation.

How to Format a Drive of exFAT Formatting in Windows 7

A large number of people are using the windows 7 operating system nowadays. Due to its high compatibility and high graphics, it provides a lot of ease to the developers and as well as the users of the computer. That’s why windows 7 operating system is one of the most popular operating system from all the available operating system all over the world. We have two types of formats in Windows XP operating system; one is Fat file system while the other is NTFS file system. In Windows 7 operating system Fat32 is replaced with the exFat format. This file format type in windows 7 operating system facilitates the users to format a removable disk or the drive with exFat. I will now discuss how to format a drive with exFat formatting, in this article.

There are a few simple and very easy steps that you can follow for formatting the drive using exFAT format in Windows 7 operating system. First of all you must have a windows 7 operating system installed on your computer to format the drive using the exFAT file format. If you have installed the Windows 7 operating system connect your removable device or the hard drive which you want to format.

Remember if you want to format a drive of your computer, it is not possible to format the main hard drive with exFAT format using windows 7 operating system. If you want to format this then connect the drive as a slave drive or as a secondary main drive. This method for formatting the drive using exFat file format is not just only for the hard drives but you can also format the other removable devices like SD card and this is a major advantage.

In the second step, go to the Start menu icon located at the left bottom corner of your computer’s desktop. When the start menu dialog box appears, you should click on “My computer”. Now after selecting this icon from the dialog box, perform a right click on your desired drive which you want to format with exFAT file format. You can easily format the secondary hard drive of your computer, although you will not be able to format the primary drive of your computer using windows 7 operating system with exFat format.

Now in step four select the file system format type. There are three formats for the hard drive available in Windows 7 operating system. These choices are NTFS, Fat, Fat32 and exfat. Default setting will be at the FAT, but now you should select the exFat formatting option. Now click on the start button to format the drive. After formatting, all the data available currently on the drive will be erased. You can format the drive to make more space or for any other needs by using this method expressed above.

However, there is also a number of software available on the internet to recover the data that has been erased. You can recover the data in case you have formatted the wrong drive by mistake or if someone else had erased all the data on your personal computer.

How to partition and format a hard disk by using Windows XP Setup program

You need to format a hard disk before installing Windows XP via the Windows XP Setup program.

Preliminary steps prior to partition and format of a hard disk

There are certain steps you need to follow, before you partition and format the hard disk. These steps are enumerated as under;

  • Arrange the hard disk in accordance to the maker’s directives

The ones using a SATA hard disk have to directly go to the “Determine the type of     file system that you want to use” segment. Those using an IDE hard disk, have to lay down the jumpers and the cabling according to the task of the hard disk and make all the necessary BIOS (or CMOS) changes.

  • Establish the type of file system to be used

You can utilize NTFS, which is the favored file system to set-up the hard disk except, if you want to run a former version of Windows which would be unable to read NTFS partitions.

Steps to partition and format a hard disk by using Windows XP Setup program

The procedure to be followed for partitioning and formatting the hard disk using the Windows XP setup program are as follows:

  • For the purpose of partition:
  • First, introduce the Windows XP CD into the CD/ DVD slot. One can also put in the Windows XP Setup disk in the floppy disk drive, and after that start over the computer to begin the Windows XP Setup program.
  • Launch the computer from the CD/ DVD drive.
  • At times, the hard disk controller necessitates a third-party OEM driver. At these times you will have to enter F6 key in order to indicate the driver.
  • Now, you will be able to see a “Welcome to Setup” page on your screen. Press “Enter” to continue.
  • In case the computer detects an already installed Windows XP system, you are incited to refurbish it. If you do not wish to refurbish it, pressing ESC key once will do the needful.
  • All accessible partitions and non-partitioned spaces are programmed for physical hard disks. You can utilize arrow keys to opt for an existent partition. You can also make a fresh partition by choosing the non-partitioned space. Pressing C key once will create a new partition by means of non-partitioned space.
  • Press “Enter” for generating the partition with the greatest possible size. Type the size in megabytes to determine partition size, followed by “Enter”.
  • For the purpose of formatting the hard disk and installing Windows XP:
  • You have to pick the partition to install Windows XP. Help of arrows keys may be taken. Once selected, pressing “Enter” will execute the command.
  • Now choose the option to format the partition. Selection has to be made from options like using the NTFS file system, via the FAT file system, by the NTFS file system, with the FAT file system. The existing file system should be as it is.
  • Pressing “Enter” will execute the command.
  • Now the Windows Setup program will format the partition. For the purpose of installation of Windows XP, do as directed by instructions on the screen. Restarting the computer will successfully install Windows XP.

Always back up your data

The partition and format of a hard disk will erase all data present on the computer. This data will be deleted permanently so having a back up of all the data is advisable.

How to Format Windows XP from the Command Prompt

The hard drive of a computer that runs on the Windows XP operating system could be formatted using its own interface or by using the command prompt. As command prompt is an interface that is using command line, you cannot use a mouse and there will be no Windows. You must type the commands by entering the correct text. There are various procedures to follow when you do this.

How to go to Command Prompt

There are a couple of ways to access command prompt. One way is to use the Windows XP CD Rom, boot the computer and go to command prompt from there. Insert the CD in the CD Rom drive and select the command prompt, or you can select MS DOS interface. You will end up at the command prompt. Another way is to select the “Run” option and typing “cmd”. Then click on OK or press enter. This also will take you to command prompt.

Entering the command for Formatting

The command for formatting a hard disk is Format(C). C here stands for C drive. In case, you need to format another volume, you must enter the corresponding letter – D, E etc. What you have entered is the basic command. You can enter further details into the command line. These commands specify other actions to be performed in the process of formatting the disc. The command that specifies the file system to be used in formatting is “/fs: (file system)”. The file system could be any one of the three file systems used; FAT, FAT32 or NTFS. In case you need to format the C drive on the NTFS file system, the command you must enter is ‘Format C:/fs:ntfs’. If you need to go for quick formatting, you can give the ‘/q’ command. It is just a case of  adding it to the command line and then the command will look like ‘FormatC:/fs:ntfs/q’. Remember to leave a space between each of the commands. If you miss this point, syntax errors will not let you proceed and the computer will not understand your commands.

Reinstallation of the Operating system

When you format a hard disc or any other storage device, all data in it will be erased and lost. So normally you format a hard disc only before you install the operating system or when you need to reinstall it, due to some reason. When you need to install the operating system, store all your data in the particular storage device before starting with it. You can store it in a removable drive such as a flash drive or writable CDs or DVDs. Now insert the Windows installer disc in the CD Rom drive and the auto run program will pop up. Follow instructions and you will end up with a fresh installation. Copy the backed up data and you are done.

Learning how to use the command prompt, how to format disc drives and how to install operating systems is important, as you need to carry out these tasks to maintain your system and to ensure optimum performance.

Call Now: +1 315-226-4249
Call Now: +1 315-226-4249
Call Now: +1 315-226-4249