Online PC Support

OPS Technical Solutions : +1(833)-522-1003

Welcome

How to Install free AVG 7.5 Antivirus Software

Installation of Antivirus software has become an absolute must in all scenarios, irrespective of the purpose of setting up a computer network. For preventing the system against possible damage, many programs have been introduced in the market.  AVG is one of the popular Antivirus programs that offers benefits like periodic scans, scans of sent and received mails and also repairing virus-infected files. It can be used not only in Windows enabled operating systems but also for Linux, Free BSD and Mac OS X computing platforms.

The AVG 7.5 is one of the new versions available for the software that are used to scan files to check if they contain any malware and then remove them. Before opening or downloading any file from the web, it must be checked through the software. Although the latest version available now is AVG, many people prefer using 7.5 because they are unsure of bugs in the new software.

Instructions to Install AVG 7.5 free Antivirus Software

You can buy the application but it is also available free of cost on the web. The following steps can be followed to download it.

Step 1: Search for the application on the Internet. The most common way to find it is by typing its name in the Search Box in Google. It will take you to a list of the all the links where you can download the file for free. Go to any of the links and look for the ‘Download’ or ‘Install’ option to get the software on your system.

Step 2: Once you get the application, open it to go to its welcome screen. Click on ‘Next’ followed by ‘Continue’. Once you have read the terms and agreement of its usage, click on ‘Accept’. Then the program would check the system statistics.

Step 3: After the previous step, the application needs to be personalized. Choose the user name. The free version would already contain the license number in the application. You can change the install folder if you click on ‘Browse’ or by typing the name of the folder. Click on ‘Next’ to continue further. After that, all the components would be installed. Click on “next’. You can then choose your e-mail program. This step would ensure that any e-mail that you receive would be free from any viruses or infection. Click on ‘Next’ and then ‘Finish’ after reading the summary of the installation procedure.

Step 4: You would need to wait for the program finish installation, which may take approximately a minute. Once it is done, you would get the ‘Installation Complete’ prompt on the screen. Restarting the computer would be required. Click on OK.

Step 5: Click on the ‘Update’ button once the program restarts. This would make the download and installation procedure complete.
It must be made sure that the AVG 7.5 software is updated at least once every seven days to maintain proper check on any new virus. After all, prevention is better than cure.

Trendnet Wireless Router and its installation

Routers have now given way to wireless routers that perform the multiple functions of a router as well as a wireless access point. Precisely, they are now used to allow Internet connectivity without the need of a cable connection.

With Trendnet Wireless Routers, the advantages are many as setup and configuration are fairly simple and minimal. In just a matter of few minutes, high speed Internet access starts getting shared among multiple PCs. These routers also offer other remarkable functions like firewalls and boast of advanced user functions built into them.

 

 

Installation of a Trendnet Wireless Router

 

Installing the Trendnet Wireless Router comes without any hassles involved. It is very similar to other consumer friendly wireless routers and there’s no requirement of any additional software. All is required are few steps and instructions that need to be followed.

Step 1: First of all, fix one end of the network cable into the Ethernet port on the cable or DSM modem. Then fix the other end on the back of the Trendnet router, into the port labeled WAN.

Step 2: The second network cable then needs to be connected to the computer’s Ethernet port. The other end is to be plugged into any of the LAN ports on the back of the router. These ports are labeled as 1, 2, 3 and 4.

Step 3: If one’s using Windows XP, access the control panel and then open ‘Network Connections’. Then right click on ‘Local Area connection’. Whereas if one’s using Windows Vista, access the control panel first. Open the ‘Network & Sharing Center’ option and then open ‘Manage Network Connections’. Right click on your ‘Local area Connection’ then. ‘Properties’ from the menu option is selected and it is made sure that ‘Internet Protocol’ or ‘Internet Protocol version 4’ is checked. Highlight and select the ‘Properties’ button. In the window that appears, the Windows Internet Protocol Properties should be set to ‘Obtain IP address automatically’ and ‘Obtain DNS Automatically’.

Step 4: Open the web browser and type 192.168.10.1 in the address window. Then enter the username and password as ‘admin’. Then click on ‘Login’.

Step 5: On the Function menu that appears, click the Wizard button. Complete the steps and restart the router to apply the router configuration settings.

Step 6: Once the router is restarted, return to the Function menu as described in the previous steps. This is done to apply wireless security settings. The authentication type and pass-phrases should be written down.

Step 7: Access the Control Panel again. Select ‘Network Setup Wizard’ on Windows XP or ‘Network and Sharing Center’ on Vista. Then select ‘Setup a Connection or Network’ wizard in order to connect the router. Then the pass-phrases and security keys are applied to computers sharing the network.

The above steps bring to light the multiple advantages of the Trendnet Wireless Router. It has the convenience of the wireless network and the security of a wired network at the same time. It provides access to the Internet and allows sharing resources within the broadcast range of the router.

How to Troubleshoot the Microsoft Exchange Server installation?

For windows users setting up any software on their machines normally appear to be a very simple job. All you have to do is to select the directory and then keep on clicking next till you reach the last window that says finish. But with Microsoft exchange, things get a little tricky as there many points that must be kept in mind or else the software won’t work properly.

Important Points for setting up Microsoft Exchange Server:

1.   Active Directory

Exchange Server works on the concept of Active Directory. It essentially means that once it has been activated in a network then the sharing process is done by using a centralized machine rather than in a work group. Now this active directory is stored on a server known as domain controller. Although only one is required but it is preferable to half two because these machines need constant reboot hence if their number will be double then they will be able to cater to the clients better.

2.   Catalog Server (Global)

The first domain controller becomes the global catalog server as a result when in function, it can replicate itself multiple times so as to provide efficient usage.

3.   DNS

The setting up of mail boxes and internet browsing is accomplished using DNS protocols. It simply means that when you request for a page over the net. Your DNS server connects to the locations directory and then fetches back the address. Microsoft uses DNS with Active Directory so that you don’t have to depend on ISP servers. The ideal way to set this up is by giving the highest priority to the client DNS list, then to the domain controller and then to ISP DNS. The last configuration is necessary as it acts as a back up in the event of system failure.

4.   IP Addressing

Bu default every internet enabled system comes with a public IP address that is provided by the respective internet providers. But it is recommended to have an internal address for the organization itself. As it helps in rerouting of data faster and safer than public IP addresses.

5.   Naming

It is very important to provide names to the servers as it establishes its unique identity. Most people give general names to their servers thinking that they might be able to protect their servers from the hackers and potential viruses, however that does not makes any difference as both of them look for ports rather than names.

6.   Hard Ware

The essential requirement to load Exchange is 512 RAM although 1 GB is recommended. Any CPU where the prime objective is to run Exchange Server then it should work fine on it. The software requires a 32 GB dedicated partition in the hard drive.

Although the process itself is not very complicated and if you follow the guidelines properly then the installation will be a breeze.

How to Fix Microsoft IE 8 Installation Errors

If you are among the few who have been facing errors while downloading or just after installation of Microsoft Internet Explorer 8, follow the steps to fix the common errors. There is several trouble shooting steps available depending on what Microsoft Operating System you are running on your computer and the security settings set on your computer.

Things to keep in Mind

Before you begin any step you need to be in Administrative mode. Then ensure you have changed all security settings back to default mode and any custom changes have to be adjusted.  Next run your antivirus software and / or malware to ensure there are no bugs or virus in your computer that could be bothering with the proper functioning and download of IE 8. Also you may need to temporarily disable anti-spyware and firewalls, which may be blocking from new settings to be installed in your computer. Also ensure you have backup all your important files and folders in case you need to run a clean reinstall of your operating system, which could ensure proper functioning of your Microsoft Windows operating system.

Installation Prerequisites

Microsoft Internet Explorer 8 can only be downloaded to your operating system after it ensures it is compatible with the version of your windows. You computer need to be running on Windows XP Service Pack 2, or Windows Vista Service Pack 1 and Windows Server 2008, or Windows Vista without any particular service pack. While you are using your current version of Internet Explorer, you may have to change from the current page or settings you were in earlier. Therefore you create a shortcut of the to the Web page you were on earlier, so that you can visit the webpage after all installation procedure and not loose any information or go search for the web page you were on.  Creating a shortcut is easy, simply right click on the page you are in and you will be given the option Create Shortcut, this will leave a shortcut of the page on your desktop or any targeted folder so that you can access it when you restart your computer after the IE installation process.

If none works

There are instances, where even after thoroughly following the steps, you are still unable to fix the installation errors you faced while downloading Windows Internet Explorer 8. In the event visit Microsoft website and search for Internet Explorer 8 Readiness Toolkit, this will give you a link to a website under the same heading, where you can report a complaint or see related function errors.

Also ensure when you are downloading Windows Internet Explorer, you download the version from the original worldwide sites, so you can be sure of the source of download. Also try to uninstall the program first if you are not able to use it optimally and reinstall the browser from the website, this should ensure most errors are fixed. Also ensure you have updated versions of your Microsoft Windows operating system like Windows XP, Windows Vista and / or Windows 7.

How to Enable New Installation of Windows Vista With the Upgrade DVD

You may want to change the Operating System of your computer and install Windows Vista, or you may want to install on a new computer. In the first situation, it is necessary to save the stored programs, flies and other documents whether downloaded or stored images or videos or anything else. The idea is to save whatever is stored in the computer while you are going for a fresh installation of Windows Vista.

Know your Windows Vista before installation

Windows Vista comes in  two versions namely 32 bit and 64 bit. It is the difference created for compatibility of the CPU in regard to the capacity of handling large amount of data input by the RAM. Obviously, 64 bits accounts for double the strength of RAM than that of 32 bits. Keeping the compatibility factor in the picture, Windows Vista comes in both the versions of 32 bit and 64 bit. As such, you need to get the appropriate version to ensure compatibility.

Installing Windows Vista on a new computer

Whichever version of Windows Vista you are installing on a new computer, insert the DVD disk in the drive. Open the drive and run the program. The computer will first start booting from the DVD; to let the computer start on it, press any key. In the next step, it will ask for the keyword or password, for which you will find necessary guidance inside the DVD pack. Feed the password and continue following the installation prompts until the prompt ‘finish’ shows up. Click on ‘finish’ and your computer is ready with Windows Vista Operating System.

Installing Windows Vista with the upgrade DVD

The situation indicates that your computer is already on XP Operating System. To save all your existing programs and files, copy everything on some external storage device to ensure security from any loss of data.

After you insert the Window Vista DVD and run it, the page of installation will open up to begin the process of installation in the following manner:

  • You will get the prompt whether to ‘install now’; click on it that feeds the command ‘yes’.
  • Then it is a simple process of following the successive installation prompts displayed on the page until it comes to the finish stage.

Caution: since the process of upgradations is a continuously ongoing process, there is generally a need to upgrade your Windows Vista OS to the latest enrichment or incorporation of up to date enhanced features. That is why, it is better to be online during the installation and get loaded with updated features right at the time of installation.

After completion of the installation, it is always better to restart the computer.  When you install the Windows Vista whilst off line, your Windows Vista OS is not fully updated. When you are online afterwards, Windows downloads the upgraded features and stores in memory for automated upgradations when you are not using the computer. That is the reason; you see the message not to shut down the computer after you finish working.

Call Now: +1 833-522-1003
Call Now: +1 833-522-1003
Call Now: +1 833-522-1003