Online PC Support

OPS Technical Solutions : +1 315-226-4249


How To Fix a Failed Linksys Wireless Router Set-up

It is very important for a person to have internet connection these days. Most people are online at least for a major part of their working time. These days, it is even possible for you to have many computers connected to the internet because of the WiFi facilities available. These are wireless connections that make it easy for the internet user and give them to move around within the area that is WiFi enabled. One of the most common methods that is used to connect to the internet wirelessly is through the Linksys wireless system.

If the Linksys wireless system does not work, then you will be in a soup. This is because till you get the whole system back on track, you will have major problems. There are certain methods that you can use as tips to get the system up and functioning again. Trouble shooting in times when the Linksys wireless system does not work will help you to rectify the fault.

The first step that you need to take in the process of getting the router working is that you will have to turn on the router and then make sure that you press the reset button on the router for about 30 seconds. You may find it difficult to press the reset button with your fingers and so you can use a pencil tip to reset. You can also remove the router and reconnect it after a few seconds.

Another thing that has to be done is to remove the DSL connection to the computer and then connect the modem to the first port on the router. Once this is done, you should reset the router again and start the browser of the computer. Once this is done, you can add the address in the address bar of the browser. Once you have done this, you are asked to log into the system. In this, though you do not need a username to log in, you should have a password. The usual default password is admin. Once this is done, you should also make sure that you clone the MAC on the PC.

All these processes may take some time and so once this is done, you should enter the Setup and again change the LAN address to After you save the settings, make sure that you remember what you have done as it will help you to make needed adjustments later. The final step is to shut down the system for a full two minutes. Once the system and the router are restarted, they should usually work. If the system works, you should put the system off again along with the router.

After this is done, you should connect and start the DSL modem. The next step is to turn on the router and then finally the PC is turned on. These steps should make you online and because the whole system is wireless, you will be able to work on the internet in any place within the WiFi enabled area.

A to Z of setting up your D-Link Wireless Router

Follow these simple steps to set-up your brand new D-Link Wireless Router

For users who are new to a wireless router, it is a device with the same functions as that of a router but apart from these it also includes the functions of a wireless access point. Some of the common features in the latest wireless routers are as follows:

  • They consist of LAN ports which work in the same manner as that of network switch.
  • They also have WAN ports to connect to Internet networks in the area around them. Many functions will be evaded in case this port isn’t used.
  • A wireless antenna is available to connect to other networks from other wireless devices. They use the Wi-Fi standards to do the same.

If you are a Windows user then setting up your wireless router becomes a tedious job and more often we make mistakes in its set-up. While installing wireless routers there are many measures to be taken and various preferences to be set. However D-Link offers excellent set-up for your system and we help you put together your D-Link wireless router.

The basic things you’ll require while setting up your router are:

  • Your D-link router
  • Internet connection
  • Ethernet cables

Steps to set-up your D-Link Wireless Router:

  1. i.            Connect the DSL Modem to one end of the Ethernet cable.
  2. ii.            The other end of your cable should be attached to the back of your D-Link Router into the WAN port.
  3. iii.            Use one more Ethernet cable to connect the router with any of the wired computers via an Ethernet port.

To enter the basic configuration screen of D-Link Router follow these steps:

  1. i. Go into your web browser and type in the following address into the address bar and press enter "".
  2. ii. When the login screen appears enter “Admin” as the username and do not fill up the password block.
  3. iii.            After entering the username click “OK” and the D-Link configuration screen will be visible to you.

Steps to have general security for your Router:

  1. i.            Click on the “Tools” option and you will see “Admin” button. Click on it.
  2. ii.            Under the heading of “Administrator” click on new password, then add a new password, confirm it and hit on “Apply” button to activate it.
  3. iii.            If you won’t be using wireless facilities on your router and don’t want others to misuse it as well then stop the LAN functions on it.
  4. iv.            Go in the “Home” options then select “Wireless” and hit the off button to turn it off.

Steps to facilitate Wireless Encryption Protocol or WEP:

  1. i.            In the configuration screen look for “Home” button and click on “Wireless”
  2. ii.            Select the option for “Open System”
  3. iii.            Next to the “WEP” button select the “Enabled” option.
  4. iv.            The encryption has to be set to “128 bit”
  5. v.            Change the “Key Type” to “ASCII” format and put in a 13 digit code for “key 1” field.
  6. vi.            Note down the password for future reference at a safe location and hit on “Apply”.

Steps to altering the SSID and to sort MAC addresses:

  1. i.            SSID has to be changed for making it more complicated for others to find your network. Select the “Home” button and then the “Wireless” option.
  2. ii.            Change the SSID from default to one with your preference.
  3. iii.            Go the “Advanced” option and then into the “Performance” option. Put a tick in the “Disabled” box and click “Apply”.
  4. iv.            Go into the “Advanced” option again and into “Filters” button.
    1. v.            In the “MAC Filters” and select the option “Only Allow Computers with MAC Address Listed Below to Connect to the Network.”
    2. vi.            Enter the names of computers allowed to access the network including your own and hit “Apply”.

Connecting HDMI TV to your PC made easy

Missed your favorite TV show or want to enjoy your movie while at home? Now broadband Internet connection has an answer to all. You can watch these online for a small charge or sometimes even for free. However some of the fun is lost while we watch in the small screens of our computers within the walls of our home offices. It is more fun watching them on our TV screens in the comfort of sofas in our living room. This article provides guidance to enjoy online TV serials and programs on big screen. Read on to find out how to connect your PC to an HDMI TV all by yourself.

Follow these simple steps to make it possible:

Step 1:

  • Switch off your computer and turn it around so that the rear part is visible to you.
  • Find out the cable of the monitor and trace it back to the PC.
  • Cable will be attached to a video card by a 15-pin VGA or 29-pin DVI port.
  • Also look out if there is another VGA or DVI or even a HDMI port if the PC is of newest version.

Step 2:

  • Select the cord for video output.
  • If you have an HDMI port, then connect a cable of right length between your PC and TV.
  • You need to buy a new DVI or HDMI output cord if your computer has only one output video card. Install the new cord into the available slot according to the instructions given in it.
  • In case you are connecting VGA output in single output or dual output card for the HDMI display then you need to purchase a converter to convert between these different formats.
  • The price is the same as an entry level video card. So in this case it is better to purchase a better card and install DVI or HDMI port
  • In case of DVI output port, you can buy a cable converting the output into HDMI format for your TV.

Step 3:

  • Take the HDMI cable and use it to connect your PC and your TV.
  • Sometimes even an adapter is required for changing the format.
  • You will also need sound card output to HDMI cord if your PC does not have HDMI port.

Step 4:

  • Restart your PC.
  • Click the “Start” menu and go into “Control Panel”.
  • You will see a “Display” option, go inside it by double clicking and select “Settings” option.
  • Your HDMI instruction kit will have the resolution that it supports. Go into the “Settings” option and select the resolution given in the guide.
  • Select “Advanced” option and refresh it to arrange it new resolution.
  • If you are using HDMI TV as the second monitor then you will have to configure it as well according to the video card installed in it.

Step 5:

  • Once the changes are done, restart your PC to apply them.
  • Now your system is installed and ready to use.
Call Now: +1 315-226-4249
Call Now: +1 315-226-4249
Call Now: +1 315-226-4249