Online PC Support

OPS Technical Solutions : +1(833)-522-1003

Welcome

How to Restore your Dell Computer to its Windows Vista Factory Settings

When you turn on your Dell computer and you find that you cannot use the usual computer format because of settings that may have been changed, there are a number of things that can be checked to restore them. It is possible that you have changed the windows settings by mistake, saving them in a different mode that is not compatible with the computer task that you wanted to perform. The first thing to do is to ensure that you have saved the right Windows Vista Settings in a compatible format with the task. If this does not work, then you may need to restore the Dell Windows Vista to Factory Settings.

Vital Tips When Restoring Windows Vista to Factory Settings

Before starting the procedure, you should first remove all devices connected to your computer except for the mouse and the keyboard. Before proceeding to do this, make sure that you save a backup of all your works and documents onto a CD or memory stick. This is because any installations or files saved on the computer will go back to their original state when you resort the Dell Windows Vista to Factory Settings. Once your work is saved and all external devices have been removed, all you have to do is turn of your Dell computer, wait a few seconds, and then turn it back on. Wait for the Dell logo to appear and immediately press the F8 button. The F8 button may not always respond immediately so continue to press it for a number of times. When you have successfully done so, a ‘Repair your Computer’ sign will appear amongst other options, choose this option and press the ‘enter button’. You will need to set the keyboard layout to ‘US’ after which you will need to type in your Windows Vista ID and password, if any, and click ‘OK’. Next, choose the ‘Dell Factory Image Restore’ option and wait for about 45 minutes for the computer to complete its assigned task.

For further assistance

In some cases, restoring the Dell Windows Vista back to Factory Settings may not always be an smooth and easy process as a number of problems may arise. An example of such problems is if you do not manage to find one of the options mentioned previously. If you do not succeed with the ‘repair your computer’ task, then perhaps you could benefit from some online assistance from computer experts who may be able to assist you in your venture free. Simply use a search engine using the key words: ‘Restore Dell Windows Vista back to Factory Settings’ and look for expert tips. Also available is forum advice. Just register into an account and write a few lines about your Dell Windows difficulties. You may find that your problem is common and therefore has already been solved by another user. Joining a forum is usually free and does not take a lot of registration time. Nevertheless, if your Dell Vista Windows problems persist it is best if you contact your local manufacturer.

How to Restore Mailbox to PST

There are times when you delete your mailbox accidentally and often, you would tend to think there is no way you are getting them back. With lots of information such as appointments, contacts, messages or any other important stuff that comes through your mail, deleting any mail as important as this can seem like a nightmare because most often e-mails might be deleted accidentally. However, there is a way you can perfectly restore mailbox to PST and regain your mails and not very easily.

What is PST?

Just so you know, a PST file simply refers to folders in Microsoft Outlook which have data that you can export and even share with your friends, relatives, colleagues or other users. These folders are shared via the Microsoft Exchange Server and can be lost either through accidental deletion or from technical errors.  So if by any means you have deleted or can’t find your mailbox, there is no need to panic as you still recover it. Your mailbox is saved on the Exchange server for a maximum period of 30 days before it is removed. Sop regaining your mailbox should be as easy as ABC!

What you need to do!

To restore mailbox to PST, simply begin by opening the Exchange System Manager utility. This program is crucial to the success of this operation as it is the only way to restore your mailbox and if you cannot locate it, check with your IT department guys. Thus ensure that the MS Exchange Server is installed in your machine before you think of recovering any mailboxes. Once you have opened the Exchange System Utility program, click on the sign (+) so that you can enlarge the Administrative Groups tab on the left panel.  Simply open the Exchange administrative group or the Mail Administrative Group as it may be named in others. If that is done, click again on the sign (+) just beside the primary exchange server and then from here, simply click the sign (+) again to enlarge the tab Mailbox Store and from the options you will see, right click on the tab Mailboxes and choose Run Cleanup Agent. You will immediately see a list of all the mailboxes that were deleted from the server recently.

Restore Mailbox

Up to this point, it should be easy to restore your mailbox, just locate the mailbox you want to restore from the list and right click on it, from drop down menu you will be given simply select Reconnect, choose the user account where you want the mail box to connect to and press OK to restore the mailbox.

Launch Outlook again and you will notice that the PST folder with the mailbox you wanted restored has just been restored. It should be that easy so next time anything happens to your PST mailboxes, this is what you should do!

How to Restore Windows Vista to its Factory Settings

Microsoft Windows Vista has a considerable change in its interface if compared with Windows XP. Most of the features and menu options are found in different places where they used to be in its predecessors. At times if you do something wrong or if your Windows Vista computer starts behaving erratically then you might need to restore it to the way it was when you purchased the new computer. This method of restoring the computer to the way it was when you purchased it is called System Recover and it Restores Windows Vista to its factory settings. All the settings, software, applications etc are rolled back to their initial form.

Every OEM computer be it a laptop or a desktop has a recovery partition present in it. If the recovery partition is not present then the user would have received a recovery disk or a set of recovery disks. This recovery partition or the recovery disks contains the image of your computer system and this image can be used to recover it back in case required. These recovery partitions contains image that can be used only for restoring the system back to the original date and does not contain any changes that you would have made while using your computer. This recovery partition or the recovery disk along with the entire operating system also contains software and drivers which you got preinstalled when you purchased the computer. So if you uninstalled several applications or device drivers after purchasing the computer then they would return when you perform the recovery and you would need to remove them again. As quoted earlier restoring the system back to factory settings makes your system just like a new one. This means that all your data would get erased and there would be nothing saved on it. So please take necessary backup before starting the system recovery because system recovery once started cannot be rolled back.

Not all but few of the computers come with two types of recovery options. One is destructive recovery and the other is non-destructive recovery. In destructive recovery all the data and your files gets erased and your system gets restored to the factory settings. In case of non destructive recovery systems roll backs itself but does not deleted or erase your data. Non-destructive recovery is a kind of repair of your computer.

Restoring the computer back to factory settings is not a feature of Windows Vista or any other operating system but it is a feature provided the computer manufacturer. The recovery can be invoked by three ways. 1) If you are able to boot the computer to the desktop then you can start it from the start menu and System Recovery option (this option could have some other name as well like Dell Recovery or HP recovery). 2) By pressing a specific key to start recovery from the recovery partition. When done control is passed to the recovery partition which then performs the restoration of factory settings on your computer. 3) By putting the Recovery disk and starting the computer. It is quite similar to the recovery by recover partition but it is done through the disk and not your hard drive.

How to Disable System Restore in Windows 7

System restore is one of the finest advancement in Windows 7. Since Windows 7 is a new technology it might suffer with bugs and crashes. System restore as the name suggests is the restoring system of your computer. It involves the reinstallation of soft ware’s, updates and various drivers in your computer. It brings back all the files and data stored back to your computer and makes it run in the same way as it was prior to any crash. It is best to use Windows backup with system restore in order to safeguard your computer.  By using Windows backup with system restore you actually protect all the data along with all your e- mails and programs files of your computer. So if you are planning to disable the system restore in Windows 7, that may not be a good idea.

The only good enough reason to disable your system restore in Windows 7 is that by disabling system restore you can remove the virus in your computer. Therefore, just in case you feel like taking this step forward here is the follow up you need to perform.

Once you turn on your computer, you will have to click on the start option on your taskbar. Thereafter, go to computer’s option and right click on that. A separate window will appear on your desktop, choose the system protection option from this window.

As soon as you click on the system protection option a separate window titled system properties will appear. In this window an option of configure will be provided .the next step after clicking on the system protection option is to then click on the configure option which can be seen on the window of system protection.

Soon after clicking on the configure option a window named system protection for local disc will appear where you just have to choose the option of turning off the system protection. However, it is strongly recommended not to turn off the system protection the system may subject to protection risk due to this action. As soon as you switch off the restore system, you automatically take a risk of losing your data, files, and other various documents and soft ware’s.

In case it becomes a necessity to turn off your restore system in Windows, 7 for any purpose don’t forget to turn it on. After disabling the restore system, once the virus is removed from your computer, it is recommended to enable the restoring system to keep your files, documents, programs and other software’s safe. To enable the restore system same steps should be repeated but this time you should remove the check from disable the system restore. Once you complete the procedure of either disabling or enabling the procedure kindly restart your computer to ensure the working of your computer properly.

How to Restore Windows 7 from a System Image

The technology of today is fantastic.  Our computers have become our connection to the outside world.  They have become our file cabinets, our phone books, our postal system, our dictionary’s, encyclopedias, and even our gossip rags.  And this is great – as long as nothing happens that messes things up.  But even computers get old, get clogged up, get “tired”.

Why is it necessity to create a System Image?
Let’s say you are currently operating on Windows 7.  You have used it faithfully and filled it up to the brim.  Now it stops – digs its heals in the sand and refuses to budge.  (Can you imagine anything more aggravating?)   So what do you do?  Sure, you can run to the nearest store and buy another computer.  Let’s assume that’s not an option, nor is it an option to tell your client the task they are waiting for just isn’t going to happen because your system is down.  No, neither option is ideal.  But there is an alternative and that is to restore your computer from a system image back up.

A system image back up is an exact duplicate of the drive.  It includes all the drives for Windows to run and also includes your system settings, programs, and files.  Utilizing a full system image back up, however, is a full restoration – meaning it will basically bring your computer back to “day one”, when you pulled it out of the box.
This is a wonderful tool – and an even better tool if you thought to back-up your programs and files along the way to it’s shut down.  Nonetheless, let’s assume you don’t care what stays and what goes (and, by the way,  it will all go bye bye.  A system restore is like a time machine, erasing years.  Don’t you wish people had that option?)   However, all joking aside, if you are going through this now, in the future you will be certain to create back-up discs along the way.  Regardless, the steps are the same – either you restore your computer to day one, or you restore it to the latest back-up system repair disc you have on hand.
How can I do it?
The steps are simple and are as follows:

  1. Remove all CDs, floppy discs, and DVDs.
  2. Restart your computer.
  3. For a single operating system, press and hold the F8 key, before the Windows logo appears,  as your computer restarts.  If youuse more than one operating system, click on the system you want to repair and press and hold the F8 key.
  4. The Advanced Boot Options screen should appear.  Highlight “Repair your Computer” and press Enter.
  5. Select a keyboard layout, and then click Next.
  6. The Systems Recovery Options menu should appear, click on it to open it, and follow the steps clearly listed.

You are now on your way to a fully restored system – whether back to basics, or back to the last back-up you performed!

How to Back Up and Restore Outlook Express Data

As one of the foremost tools we use to communicate, the advent of the web and the email service is one you must use almost daily.

Better Outlook Express

In that regard, Microsoft Outlook Express is one such application that has made e-mail communication easier and changed the way we communicate online whether its business or other purposes. The society today cherishes the function of the e-mail as one of the key aspects of communication and with Microsoft Outlook Express software; you directly download your mails from the internet easily. However, what happens when you can’t access your information because your system has malfunctioned? As a user of Microsoft Outlook Express, it lets you keep your mail accounts accessible and organized and as such, it is perhaps crucial that you back up the data you have in a hard drive or networker server. It is better to take precautionary measures than wish you had.

What to do!

First of all, to begin the procedure simply access Microsoft Outlook Express from your PC  and once there click on the “Tools” tab just at the top of the now opened Outlook Express window. You will immediately see a drop down menu from which you should pick the “Options” tab. The Options tab will open and Options window tab and from the opened options just click on the “Maintenance” tab that you will easily see and pick out from the options.

The “Maintenance” tab should now be opened and from here simply click on the “Store Folder” tab and you will immediately be presented with a store Location window. Once here, simply double click on the text in the box on the Store Location window that you have opened and then right click on the text that you have selected. A further menu will show up as a drop down list and from the list, pick “Copy” and click on the red “X” tab just above the right hand corner of every window you have opened. Once you have accomplished this simply close down Outlook Express.

After the above, you have closed your Outlook program and all you have to do is simply maneuver to the start menu and go to the “Accessories” tab from where you should pick the “Run” tab and click on it. In the Run window that you have opened, right click on the dialog box and simply pick the “Paste” tab after which just hit the “OK” button. Choose “Edit” from the top of the opened window and select “Select All” from the menu. Now click the “Copy” tab option from the edit menu and then just close the window.

Go to your desktop, right click on it and from the drop down menu choose “New” and then select “Folder” from the subsequent that comes. Simply double click on the new folder you will see, right click on the white space in the new folder and click on “paste.”

There you have, you can thus easily restore your Outlook Express data and back it up too without  hassle.

Call Now: +1 833-522-1003
Call Now: +1 833-522-1003
Call Now: +1 833-522-1003