Online PC Support

OPS Technical Solutions : +1(833)-522-1003


How to start the System Restore tool in safe Mode on Windows XP

If your Windows XP system starts acting strange, a typical fix is to use System Restore to remove any system changes made since the last time you created a Restore Point. System Restore is a tool that automatically monitors and records any changes that are made to the core Windows system files and to the registry. If any change causes your system to become unstable, System Restore can roll back the system to a point in time when your computer was known to function correctly.

For System Restore to work it is important that you have previous Restore Points on your computer. If you do not have Restore Points then it wouldn’t be possible for you to Rollback the computer to any previous date.

How to start system restore?

Typically System restore can be access by going to Start -> All Programs -> Accessories -> System tools -> System restore, but what if the situation is so bad that the Graphical Interface of XP is not even loading up and you are not reaching the desktop to work upon. In such cases you mat try booting the system in Safe Mode with Command prompt and execute the System Restore utility. Steps for doing the same ate given below:

  1. Start the computer and start tapping the F8 key. This will give you a list of Advance Boot up options and you need to select “Safe Mode with Command Prompt”.
  2. Login as Administrator when prompted.
  3. Once you reach the Command Prompt execute the following command:%systemroot%\system32\restore\rstrui.exe

This will initiate the System Restore utility and further just follow the instructions over there to roll back your computer to an earlier date.

Some other facts about System restore.

How to Enable/Disable system Restore?

Open the System window by going to Control Panel and opening System. In the System window click on the System Restore tab. On this tab there is a checkbox for Turning ON or OFF the System Restore.

How to create Restore Points?

Open the System Restore Window from Start -> All Programs -> Accessories -> System tools -> System restore. Select “Create a Restore Point”.

What all is restored by System Restore?

System Restore keeps track of the following and this is what gets restored when we restore the computer to an earlier date:1. Windows Registry2. Local Profiles3. COM + DB4. WFP.DLL Cache5. WMI DB6. IIS Metabase

What is not restored by System Restore?

  1. DRM Settings
  2. Passwords in SAM Hive
  3. WPA Settings
  4. User created files
  5. Items listed in the following keys in the Registry
  • HKLM\System\Controlset001\Control\Backuprestore\Filesnottobackup
  • HKLM\System\Controlset001\Control\Backuprestore\Keysnottorestore

6. Contents of Redirected folders



How to control the disk space used by System Restore?

Open the System window by going to Control Panel and opening System. In the System window click on the System Restore tab. select the drive and click on settings. There you will get a slider to set the size allocated to system restore for keeping the restore files.

Can System Restore be used in place of Windows Backup Utility?

System Restore only monitors specific system and application files. It does not backup personal data. Restore Points are only keptfor 90 days by Windows and then automatically deleted by default. Windows Backup Utility on the other hand is a permanent backup tool that backs up all of your system and personal files on your system. It gives you ability to save this backup copy to a local disk or to a separate form of media where it can be drawn from at any time.

How to start Windows in Safe Mode

Problems with your computer are ongoing and won’t ever come to an end. A new issue is generated everyday from the ones who are more interested in deteriorating your computer experience. Windows make sure that you have ways to try to recover your computer in even the harshest ones. Safe mode is an option that is provided by Windows operating system just to make sure that you have another way to restore your computer.

Safe Mode

Safe Mode is a running mode of your computer that has been made solely in order to repair your computer while it has been attacked by a potential threat. Your computer starts with a very limited access to the complete file system as well as many of your hardware does not work properly in the safe mode. You are only granted with access to files and drivers that are essential for the running of your computer. You can see Safe Mode appearing on all the four corners of your monitor screen that would let you know that you are using Safe Mode.

There are instances where your computer would automatically start in the safe mode. Any recent error would be preventing your computer to start in the normal mode. This could be possibly because of a recent addition of software on your system. The best you can do to get rid of the issue is to uninstall the software.

Advantages of Safe Mode

Safe mode is perhaps the first troubleshooting mode that you can avail to repair your computer. At instances, the problems that persist on your computer in the normal mode do not appear on the safe mode run. This clearly refers that something wrong with the settings or the basic drivers causing the issue in the computer. You can eliminate the issue by restoring the default settings and reversing any driver change that has recently occurred.

Safe Mode can help you check for the software that causes harm to your system. You can do the elimination process just to get to the root cause of the computer issue using the safe mode option. Start using all the software that you usually use through your workings and see if they cause an error. If they don’t, you can move on to the next ones, while the ones do cause the issue might be the possible reason for your computer problem. Safe mode also enables you to solve the problem or get rid of the software causing error.

Tools to be used in Safe Mode

You can use a number of recovery tools in order to repair your computer and get it back to the normal state. The most important of them is the System Recovery tool that lists in the System Tools. You can restore your system to a previous date when the system was in fine tone and working perfectly.

Device manager is another of the essential tools that can help you update device drivers and get your system working perfectly in fine tone after any alien change.

How to Start your Computer in Safe Mode

A troubleshooting option available in a Windows system, the start mode helps you start your computer but in a very restricted state. It allows you to start your computer with only a few basic files and also drivers which are needed for the Windows to run successfully. Your usage gets restricted once you start your computer in the safe mode. The startup programs in the most common situations don’t run successfully in the safe mode. Generally, the safe mode proves to be a very useful system for all types of troubleshooting issues related to the drivers and programs which cause the Windows to not start correctly. Also, if the problem fails to appear on the screen as you turn on the safe mode, you have the chance to eliminate the scheduled default settings along with the other basic device drivers which probably may be the cause for the starting issue. There are also chances that a newly installed program in your computer prevents the Windows from starting normally. In such situations, you can easily start the computer in its safe mode and later delete the particular program. Well, in case if you are not aware of how to start your computer in its safe mode then simply follow procedure mentioned below.

1. If you have any CD, floppy disk, DVD, etc. inserted into your computer, simply remove it from your computer. Now try to restart your computer again.Click on to the Start button in your computer and then click on the arrow located right next to the Shut Down button. Here click on Restart.

2. Select one of the given options:

  • In case your computer has just one single OS installed in it, then press F8 and hold it for sometime while your computer restarts. The F8 key should be pressed before the Windows logo appears onto your computer screen. However, if the windows logo appears before you press F8, then you will have to try it all over again until you are finally prompted by Windows logon message. Now shut down and then again restart the computer.
  • In case your computer is installed with more than one OS, then make use of the arrow keys to simply highlight the particular operating system which needs to be started in the safe mode. Now press the F8 keys.

3. As the Advanced Boot Options screen appears, highlight the safe mode using the arrow keys for the option you wish to select. Now press Enter.

4. Finally, log onto your computer using the user account with the administrator rights.

Just as your computer starts in the Safe Mode, you will notice these words, Safe Mode written in one of the corners of your computer monitor. Well, in order to simply exit this safe mode, you will have to restart your computer and then let it start normally.In this way, you can start your computer in the safe mode easily and then take up your backup or follow any process based on the requirements.

How to Start System Restore through Command Prompt

A tool which allows the automatic monitoring and recording of any changes which are made to the core Windows system files and to the registry is known as System Restore.  If a change brings an imbalance in the system then System Restore can undo the system to a point in time when your computer was known to function correctly. For instance, your important data is lost and if your computer is not working, System Restore can bring back that information which might be very crucial for you.

Essentials One must be logged on to Windows with a user account that is a computer administrator to complete the following steps. If a new program has made the computer to act randomly, and uninstalling the new program did not help, you can try the Windows XP System Restore tool.

If there is no previously set restore point in System Restore, computer cannot be restored to a previous state. In case of uncertainty or restore point is not set, Support Center should be contacted.

In order to start System Restore using the Command prompt follow these steps: at first, computer needs to be started followed by the pressing and holding of F8 key during the initial startup to start the computer in safe mode with a Command prompt. Next, the arrow keys should be used to select the Safe mode with a Command prompt option. In case you are prompted to select an operating system, use the arrow keys to select the appropriate operating system for your computer, and after that press ENTER.

One has to log on as an administrator or with an account that has administrator identification. At the command prompt, you must type%systemroot%\system32\restore\rstrui.exe, and subsequently press ENTER. Lastly, the instructions should be followed which appear on the screen to restore the computer to a working and functional state.

In order to access System Restore tool with an additional safe mode option, the Microsoft Help and Support Web site can be visited and the article “A description of the Safe Mode Boot options in Windows XP” can be referred to.

Running the windows using the command prompt is just a few steps. But the instructions need to be followed properly. A step by step guidance is available for the users. Starting System Restore in safe mode with command prompt is easy. But, in case, the above methods did not resolve your issue, you may want to ask someone you know for help, or you may want to contact your ISP service or network administrator for help.

Call Now: +1 833-522-1003
Call Now: +1 833-522-1003
Call Now: +1 833-522-1003