Online PC Support

OPS Technical Solutions : +1877-770-0433

Welcome

Intel Huron River: The Upgrades and the Setbacks

Intel’s new product for mobile platforms, the Huron River processor, will become more autonomous in 2011. Unfortunately, one of the concerns among different clients is that the new Intel Huron River processor will not incorporate the USB 3.0. This issue surrounding the Huron River can be better understood with some knowledge of the Intel Calpella, due to be replaced in 2011. In addition, Intel plans to introduce an entirely new and fascinating concept of mobile platforms in the future.

More efficiency means less power

The Huron River has a built in processor, (Cougar Point Sandy Bridge) chipset also included. According to Intel, the Huron River consumes less energy compared to Calpella, and they both consume considerably less power compared to other processors, as the microprocessors are quite small. The Dual and Quad-Core Sandy Intel processors are far more efficient than the Clarksfield or the Arrandale.

Better response, better performance

Another feature is its integrated graphics driver, called the Iron Lake, which is already present in it. Amazingly, the Sandy Bridge CPU will be much smaller by an etching of about a 32nm processor. With hard drives built into the standard configurations of the Huron River, system responsiveness will be improved, and we can be assured that these chipsets will be well able to support the Cougar Point SATA 3.0 (6 GB/s)

The unfortunate downside

We will just have to wait until 2012 to see if Intel launches a new mobile-based Intel processor that has a USB 3.0 support in it. The Huron River platform will replace Calpella (the current crop of mobile chipsets), and continue Intel’s fine work with WiMAX and Wi-Fi integration, in addition to the new Intel Bluetooth connectivity, and that crowd-favored Intel wireless display. The new Sandy Bridge 32nm processor will power the platform, a follow-up to Nehalem’s Core i series of chips. We should be seeing this in Q1 2011, which will probably be only minutes after Apple, has finally made up its decision to offer an upgrade to core i7.

Still something to consider

With many astonishing features and functions combined, the new Intel Huron River will be more energy efficient than the Intel Capella and other processors. Although many people still prefer support under USB 2.0, with at least a single USB 3.0, some products will support 12-14 USB 2.0. However, these products do not include the USB 3.0 support, as does the Mobile Express chipset Series 6 Cougar Point.

The processor is said to be readily made to fully support Blu-ray 3D. This is as a result of all the upgrades that the platform has in comparison to the current processors in the market, such as the Intel Core Series processors. Manufacturers will have to make 120Hz laptop screens in order to make this feature useful. When this is realized, consumers will truly be able to benefit from this advanced release.

How to Install Windows Vista Ultimate Upgrades

Windows Vista Ultimate upgrades have every possible utility you are looking for. The best things about Windows Vista Ultimate are its aesthetically pleasing appearance and its easy step-by-step guide that helps users in performing complex tasks. Features like these make it much easier to work using Windows Vista, and you will find it very convenient to manage this operating system. For instance, task bar thumbnails allow you to reach your data without even clicking anything!

Installing Windows Vista is also very easy. Just follow the simple step-by-step instructions below, and in a few minutes, you’re ready to go.

Installation of Window Vista Ultimate Upgrade

First, you need to know whether your system is ready for this process or not. You can simply go to http://www.windowsvista.windowsreinstall.com/specs.htm to check it out.

If it is compatible, then the next thing that you need is a computer with a DVD ROM or CD ROM and a CD of Windows Vista Ultimate. Always remember to keep a backup of all your important documents so that if the upgrade fails, you can still get back to your data. Insert the CD and you will see the option for “Auto Run”. If you cannot see these options, go to My Computer, look for the DVD drive icon, and double click it. A screen will appear, and you need to click “INSTALL NOW”. You will be asked to wait while the system checks your configurations.

After which, a window will appear that says “Go Online” for the updates. If you do have an Internet connection, choose this option; otherwise, select “Do not Get It”. If you have chosen the first option, windows will start downloading the updates. It may take a while so please be patient. In the next phase, you need to put your PRODUCT KEY. You can skip this part—however, if you choose to do so, your Windows Vista will only be valid for 30 days. Click “NEXT”. Accept the license agreement and click “NEXT”. Select the “UPGRADE” option. At this stage, the system will check the compatibility of the programs already installed in your PC. You will now see a REPORT that shows which programs are not compatible with your PC. Shortly after this, the upgrade process starts. This may take some time, patience is vital. After a number of reboots, Windows will ask you whether you want to protect Windows automatically. Select whichever option appeals to you and then proceed. After this, the Windows login will appear on the screen. You need to type your password to continue.

The Final Steps

Windows will now welcome you and prepare the desktop. Once the desktop appears, the installation process will also start. After this, some of your personalized settings will be saved. You will now be able to view your desktop, and at this point, you will need to check and install drivers. Finally, Windows will display a welcome message. You can now use the Windows Vista Ultimate.

How to Resolve Errors Related to Upgrades in Windows 7

When upgrading Windows Vista to Windows 7, many people faced a very similar and annoying problem. After the computer restarts, instead of proceeding with the install it displays this error message:

“The upgrade was not successful.Your previous version of windows is being restored. Do not restart your computer during this time.”

Although after the computer restarts, instead of rolling back to Vista it displays the same message and restarts again. Thus ending up in a reboot loop which is harmful for both OS and the computer.

One possible problem identified by Microsoft is that it might be possible that certain shell folders might be redirected locations within their own path. It means that locations might be repeated in their path.

The solution to this problem is broken down into four steps, briefly explained below.

Step 1: Windows Recovery Environment

To get to the Windows Recovery Environment put your Windows 7 DVD into the DVD-ROM and boot from it. Set you personal settings such as language, time currency etc. In the next window, select “Repair you computer”. In the next section select the version of Windows 7 that you are installing and then click “Next”. Select command prompt from the System Recovery Options.

Step 2: Find Duplicate Folders

In the Windows Recovery Environment, a command prompt window appears. Type “cd c:\users” in it.  Please take note of the fact that “C:” is the drive on which Windows is installed. If the label of your drive is different then type that instead. After this type “dir /s | find “is too long” |more” into the command prompt. Now there are three possible results that can be displayed as a result of punching in this line. One, you get a few names of folders displayed. Note them down and move on to the next step. Two, you get a number of results and a “—More—” typed at the end of page. Note down the names and press space bar to view the next page until the line doesn’t appear anymore. Then move on to step 3. Third and the last case is that no data appears on the screen. It means that the issue is something else and not the shell folders. In this case this article wont be of any help.

Step 3: Move the Duplicate Folders

In order to move the folders to temporary location, type “move [Identified_folder] [Destination_location]” in the command prompt. You will have to type in the command one by one for each folder. At the end, type the “dir /s | find “is too long” |more” command to check if any folders are left. If not then type “exit” in the command prompt and restart computer. This time the upgrade error message will display gain but after staying for a while it will restart and boot into the previous Windows Vista.

Step 4: Check Shell Folders’ Location

Open the folder where you have stored all the redirected shell folders. Right click on each and check if the Location written there is the same as where the folder is kept. If its not then click “Restore Defaults”.

Install Windows 7 again. And you are done. Enjoy your experience with the new Windows 7!

Computer upgrades boosts its performance

From time to time, companies like Microsoft bring in new versions of their Operating System in to the market.  The latest version of the operating system often comes out with enhanced or new features and amenities to gives users a great working experience, and save a lot of their time. Well, this is not the case with just the OS or the software packages installed, but also with the hardware and peripherals. Old computers consume more electricity than the most recent ones and have a delayed boot time. Therefore, the smarter way to work is to go for an upgrade be it OS, software or the hardware the users work with.

Quite a lot of the Individuals, home-office users and small business owners might not consider upgrading their PC to the latest version until some grave issues pop up in their software or hardware, which closes down their work too frequently. Most often, they tend to work satisfactorily with the existing software or OS and ignore the few alerts and warnings that the applications throws at them now and then.   Business owners have to bear in mind that updating the computers with a suitable version of the OS or software can improve their competitive edge.

Few years back, when Windows XP version was released, it was a huge success among the users and most of them still refuse to update it to the successor versions especially Windows Vista. Whoever went ahead to upgrade to Windows Vista though that it  was not a deserving OS when compared to Windows XP, because it caused many issues during or after the upgrade.  Now that Windows 7 is gaining a greater recognition not just for its striking features and ease of use, but also for a smooth upgrade processes. Therefore, it is time for the older windows versions to get a Windows 7 upgrade.

Well, now that a user is ready for an update, which edition of Windows 7 to choose. Below is a briefing of each edition of Windows 7. Though it has come up with six editions, the ones listed below are available widely in sale

  1. Windows 7 Home premium: This edition is sufficient for the individual users, home business users for this edition offers easy and quick navigation on the desktop, surf the web easily and even allows to create a home network. However, users cannot run windows XP compatible programs with this edition.
  2. Windows 7 Professional: This edition has all the Home premium features along with the facilities like running XP compatible applications and programs,  connect to company network, Backup and restore options etc.,
  3. Windows 7 Ultimate: This edition has added features like enhanced security that averts data loss or theft via encryption programs.  In addition, users can choose to work from any of the 35 languages.

Microsoft offers tips and tricks for an easy upgrade via its “compatibility center “and there is “Windows 7 Upgrade advisor” available for free download to check if there are prospective issues with the hardware or software while going on for an upgrade.

How to improve the performance and reliability of Windows® Vista without upgrading to Service Pack 1

Windows® Vista is advanced operation system (OS), developed by Microsoft. in order to replace the aging Windows® XP. It contained many improvements in all spheres – better support for peripheral devices, improved were both multimedia playing capabilities and multimedia creation tools, better memory handling and so on. At the time of its launch many believed this will lead to huge advancement for Microsoft®. But when some time passed few things turned out to be not so good – some random lockups, badly tested software and lots of other problems were noticed by users. With the release of Windows® Vista SP1 most of these issues were addressed, but it turned out some programs will fail to work with SP1, and so the need of patch to address main issues without full upgrade to SP1 became obvious.

How can you make your Window® Vista faster and more reliable without installing Vista SP1

First thing you should check is whether you use 32-bit version of Windows® Vista, or the 64-bit edition. You can do this by opening “Start” menu, right clicking “Computer” and selecting “Properties”. Your type of the OS should be written under “System” section. Please be sure to check this before you continue with this article.

After you have checked this important information download the appropriate version from the site of Microsoft:

  • for the 32-bit of the OS

Microsoft® Vista stability patch – 32-bit edition

  • or for the 64-bit version

Microsoft® Vista stability patch – 64-bit edition

Once the download is complete stop all programs running and apply the patch by running the EXE file. The short list of issues this patch will address is:

  • if you try to exit the Photos screen saver, you experience a long delay.
  • if you use the Windows Energy screen saver, a memory leak occurs.
  • when User Account Control is disabled on the computer, you cannot install a network printer successfully.
  • when you write data to an AVI file by using the AVIStreamWrite function, the file header of the file is corrupted.
  • if you copy or move a large file, the “estimated time remaining” takes a long time to be displayed.
  • when you resume the computer from hibernation, it takes a long time to display the logon screen.

Also addressed are many issues that caused system instability, driver compatibility issues and so on.

You should attempt to download and install this patch only if you experience problems with your pre SP1 Windows® Vista, and cannot install Vista SP1 for some reason. Windows® Vista Service Pack 1 includes many more patches, upgrades, additional drivers for hardware devices, makes your system much more stable. Overall SP1 makes Windows® Vista what it should have been from the very beginning, while the discussed stability patch only helps in some areas, so consider the upgrade.

Call Now: +1 833-522-1003
Call Now: +1 833-522-1003
Call Now: +1 833-522-1003